Ten-high 100W 200W 300W DC input 12V Portable Wind charge controller for DC

• For Wind Power Generator,12V Voltage grade,300W Rated power
• Control wind turbines for automatic charging battery. Under the condition of the battery is full of, through internal automatic control circuit to make the brakes, when the battery voltage drops to the recovery voltage, wind turbine back for battery charging, so as to protect the wind turbine and battery.
• Initial brakes voltage: 15V, Brake recovery voltage: 13.5V
• Comprehensive waterproof protection. This controller USES the seal completely waterproof design, all of them, and don’t have to worry about air humidity, salinity, such as ground water use environment, protection grade reaches the IP67 above, even in water can normal use for a long time, improve the reliability greatly.
• For wind turbine: ≤300W,IP Grade: IP67,Working Temperature: -35~+75℃

Product performance:

1.This controller can control wind turbines for automatic charging battery. Under the condition of the battery is full of, through internal automatic control circuit to make the brakes, when the battery voltage drops to the recovery voltage, wind turbine back for battery charging, so as to protect the wind turbine and battery.

2.Comprehensive waterproof protection. This controller USES the seal completely waterproof design, all of them, and don’t have to worry about air humidity, salinity, such as ground water use environment, protection grade reaches the IP67 above, even in water can normal use for a long time, improve the reliability greatly.

Mode of connection:

1.Respectively connected to the