Powerfilm 3V 25mA Flexible Solar Panel MP3-25

These PowerFilmTM flexible solar modules can be used alone to direct-power your small DC project (anything that runs off 3V or less and requires 25mA of current or less) – or, they can be used in your battery-charger project to store energy for later use. BATTERY-CHARGING TIPS.For battery charging, the voltage of your solar panel MUST be higher than the voltage of the battery that you want to charge. We recommend using the following guidelines: at least 2.0 volts to charge one 1.2 volt battery ,at least 3.6 volts to charge two 1.2 volt batteries wired in series ,at least 4.8 volts to charge three 1.2 volt batteries wired in series ,at least 6.0 volts to charge four 1.2 volt batteries wired in series.Multiple panels can be wired together to increase voltage or current, and the panels can be cut (following directions!) for your special project.Each module is encapsulated in 3 mil clear polyester film.Specs: Output 25mA @ 3V ,Open-circuit voltage: 4.1V ,Total size 4.5″ X 1″ ,Total solar c

List Price: $ 3.85

Price: $ 3.85

Also Recommended:

Sunforce 7 Amp Charge Controller
The Sunforce 60012 7 Amp Charge Controller prevents overcharging of 12-volt batteries. It is intended for use with 12-volt solar p…

Got Sun? Go Solar: Get Free Renewable Energy to Power Your Grid-Tied Home
A straight-talking book tells grid-connected homeowners how to use free energy from the sun and wind to reduce or even eliminate t…