My SolarMill A 4 KW Wind & Solar Hybrid | 24-hour power production
- Green and Clean, renewable energy up to 24hrs daily
- Same footprint, more power every day than solar alone
- Complete system with inverter and itis Environmentally friendly, silent operation
- Scalable power generation: E.g. put 8 (or more) together & get a 8 KW System.
- 25 Year Design Life / 5 Years Manufacturer’s Warranty
(This is for 4) My SolarMill’s 1 KW Wind/Solar Hybrid Systems. Scalable power generation: E.g. put 2 (or more) together & get a 2 KW System. My SolarMill incorporates 3 vertical axis wind turbines with P.V. (solar panels) technology within a compact footprint, creating the greatest energy density of any product on the market. The hybrid concept of the SolarMill is unique, seamlessly integrating wind and solar energy generation in a single unit. This allows the product to be an effective solution in markets where the natural resources available for wind or solar energy generation alone do not justify investment. The SolarMill is designed to work in both on-grid and off-grid environments. Whether on the roof of a commercial building to offset
- 7 High Quality Raptor SeriesTM or Raptor Generation 4TM Blades – Self Regulating Blades
- 1600 Watt, High Amp Freedom Permanent Magnet Generator (PMG)TM with skewed stator core for no-cogging!
- A Missouri Wind and Solar Freedom PMGTM has more copper for more power! Our Freedom PMGTM contains twice as much copper than any Delco style PMA
- Hot dipped galvanized finish and fully zinc plated steel hub require zero painting for up to 50 years under normal conditions!
- Also comes with: Hot dipped galvanized Stars & Stripes tail, zinc plated steel hub, rectifier, heavy duty hub spacer/stabilizer, stainless steel nuts and bolts for assembly.
It has a 14 magnet rotor inside and our skewed stator core for easy turning – up to 1600 watts max output! NO COGGING – Cut in speed of just 6 MPH
This unit comes with:
Brushless Freedom PMGTM (PERMANENT MAGNET GENERATOR) WITH 14 MAGNET ROTOR.
125,000 hours + of rated bearing life.
One heavy duty bridge rectifier for converting 3 phase to DC output.
Hot dipped galvanized mounting bracket and Stars & Stripes wind turbine tail.
Hot dipped galvanized tail fin is cut from 16 gauge steel is 9 3/4 inches wide x 28 3/4 inches high
Two 28 1/2 inch long tail arms
No slip rings to fail or replace. Wire tension system.
Comes with Raptor SeriesTM black or Raptor Generation 4TM carbon fiber composite
Find More Vertical Wind Turbine Products
