B3-32 60 Plate 1″ Male NPT Stainless Steel Copper Brazed Plate Heat

B3-32 60 Plate 1″ Male NPT Stainless Steel Copper Brazed Plate Heat Exchanger

• 11.25″ x 4.56″
• 1.92 m² Total Surface Area
• Design Pressure: 3.0 Mpa (435 psi)
• Design Temp: -195°C to +220°C (-319°F to 430°F)
• Stainless Steel 304

“Dimensions L: 11.25″” W: 4.56″”
Heat Transfer Area/Plate 0.032 m?/plate (.24 ft?/plate)
Thickness of plates 0.4 mm (.015″”)
Max Flowrate

125 L/min (33 gpm)
Channel Capacities 0.05L/channel
Design pressure 3.0 Mpa (435 psi)
Test Pressure 4.5 Mpa (650 psi)
Design Temperature -195°C to +220°C (-319°F to 430°F)
Refrigeration Capacity 5-25KW (17,000-85,000 BTU/hour)
Flow direction F1-F3 and F2-F4 (see diag above)
Welding Material 99.9% Copper
Corrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.
Manufacture Material Stainless Steel 304
Applications S

List Price: $ 375.00

Price: $ 375.00

Magnum RD 2212 2200 watt 12V modified sine wave inverter 110AMP

The RD Series Inverter/Charger is a new generation inverter
designed specifically for renewable energy use. The RD Series is
powerful, easy-to-use, and best of all, cost effective.
Power Factor Corrected (PFC) Charger is
built into all of our inverter chargers. It uses less energy from a
generator than a standard charger – using 25-30% less AC current.

The RD Series is ETL Listed to the stringent
requirements of UL 1741 (USA only), ensuring that the inverter is
safe and reliable.
Install the RD Series in four easy steps:
simply connect the inverter’s output to your distribution circuits
or electrical panel, connect your power cable (AC) to the inverter’s
easy-to-reach terminal block, connect the batteries, and switch on
the power.
Mount the
RD Series on a shelf or wall.
The lightweight
aluminum base and cover also
provides noise reduction and
corrosion resistance.

The RD Series provides
multiple ports, including an
RS485 communication port
for network expansion, and a
remote port.
Th

List Price: $ 1,459.99

Price: $ 1,459.99

Also Recommended:

Solar Electricity Handbook – 2011 Edition: A Simple Practical Guide to Solar Energy – Designing and Installing Photovoltaic Solar Electric Systems
The Solar Electricity Handbook is a simple, practical guide to using electric solar panels and designing and installing photovol…

Premium Solar Charger – Ultra Thin Solar Powered Backup Battery and Charger for Cell Phones, iPhone, iPod, and Most USB Powered Device – Also Includes Built-in LED Reading Light and Window / Windshield Suction Cups
The XTG Technology ultra-slim “Solar Portable Battery and Charger” is the perfect solution for emergency power and power on the go…

Solar Power Your Home For Dummies (For Dummies (Home & Garden))
The bestselling alternative energy reference book in North America—now in an updated editionWant to take advantage of solar powe…