B3-12 20 Plate 3/4″ Female NPT Stainless Steel Copper Brazed Plate Heat

Solar Main

B3-12 20 Plate 3/4″ Female NPT Stainless Steel Copper Brazed Plate Heat Exchanger

7.5″ x 2.9″
0.24 m² Total Surface Area
Design Pressure: 1.0 Mpa (145 psi)
Design Temp: -195°C to +220°C (-319°F to 430°F)
Stainless Steel 304

“Dimensions L: 7.5″” W: 2.9″”
Heat Transfer Area/Plate 0.012 m²/plate (.14 ft²/plate)
Thickness of plates 0.3 mm (.0118″”)
Max Flow Rate 66.6 L/min (17.6 gpm)
Channel Capacities 0.018L/channel (.004756 gal/channel)
Design pressure 1.0 Mpa (145 psi)
Test Pressure 2.0 Mpa (290 psi)
Design Temperature -195°C to +220°C (-319°F to 430°F)
Refrigeration Capacity 1-5KW (3400-17,000 BTU/hour)
Flow direction F1-F3 and F2-F4 (see diag above)
Welding Material 99.9% Copper
Corrosion Resistance SS304 has good general corrosion resistance to a range of organic and in-organic fluids. It will have poor resistance to sulfuric and hydrochloric acids. Crevice corrosion may also occur when chlorides (salts) are present in the fluid. Since chlorides are in all natural sources of water it is best to use distilled water whenever possible. typically, a unit will last about 10 years with regular tap water depending on salt content. Not recommended for use with salt water.
Manufacture Material Stainless St

List Price: $ 69.00

Price: $ 69.00

Also Recommended:

Sunforce 39305 650-Watt High-Efficiency Polycrystalline Solar Power Kit
The Sunforce solar kit is comprised of 3 units of the 130 watt polycrystalline sharp solar panel. These panels are designed for RV…

Power from the Sun: A Practical Guide to Solar Electricity (Mother Earth News Book for Wiser Living)
Easy-to-understand, accurate, and comprehensive, this is the guide for anyone interested in installing a solar electric system. Po…

Got Sun? Go Solar: Get Free Renewable Energy to Power Your Grid-Tied Home
A straight-talking book tells grid-connected homeowners how to use free energy from the sun and wind to reduce or even eliminate t…