skip to Main Content

Powerfilm WeatherPro 7.2V 100mA Flexible Solar Panel P7.2-75

Powerfilm WeatherPro 7.2V 100mA Flexible Solar Panel P7.2-75

Charge 4 AAs @ 100mA charge rate with this panel!These PowerFilm flexible solar modules can be used alone to direct-power your small DC project (anything that runs off 7.2V or less and requires 100mA of current or less) – or, they can be used in your battery-charger project to store energy for later use. BATTERY-CHARGING TIPS.For battery charging, the voltage of your solar panel MUST be higher than the voltage of the battery that you want to charge. We recommend using the following guidelines: at least 2.0 volts to charge one 1.2 volt battery ,at least 3.6 volts to charge two 1.2 volt batteries wired in series ,at least 4.8 volts to charge three 1.2 volt batteries wired in series ,at least 6.0 volts to charge four 1.2 volt batteries wired in series.Multiple panels can be wired together to increase voltage or current, and the panels can be cut (following directions!) for your special project.These WeatherPro modules can survive the hot and cold extremes of permanent outdoor use environm

List Price: $ 29.99

Price: $ 29.99

ICP Solar 10008 15-Watt Pro Kit Battery Saver

  • 15-watt battery saver provides enough power to run a vehicle full of small appliances
  • Powers a variety of small 12-volt appliance applications
  • Constructed with a weatherproof, polycarbonate frame
  • Includes 15-watt solar panel, 10-foot 16-gauge wire, built-in diode, and battery clamps
  • Allows you to combine many panels as your power needs increase

The ICP Solar 15-watt Pro-Kit battery saver provides real battery charging with enough power to run a vehicle full of small appliances. With a constantly charging 15-watt solar panel, this battery saver powers a variety of small 12-volt appliance applications. The Pro-Kit allows you to combine many panels as your power needs increase. Constructed with a weatherproof, polycarbonate frame, it also includes a built-in diode for reverse current protection. What’s in the Box
15-watt solar panel, 10-foot 16-gauge wire, built-in diode, and battery clamps.

Price:

Also Recommended:

Sunforce 39626 160-Watt High-Efficiency Polycrystalline Solar Power Kit
The 39626 160 watt solar back up kit with sharp module includes 30 Amp digital charge controller,12V voltage tester,two sharp 80W …

Got Sun? Go Solar: Get Free Renewable Energy to Power Your Grid-Tied Home
A straight-talking book tells grid-connected homeowners how to use free energy from the sun and wind to reduce or even eliminate t…

Solar Electricity Handbook
The Solar Electricity Handbook is a simple, practical guide to using electric solar panels and designing and installing photovol…

This Post Has 0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top